Tipărire 

ISS TECHNOLOGY DEMONSTRATOR DEVELOPMENT OF A METAL 3D PRINTER DEMONSTRATOR AT THE ISS (RE-ISSUE)

ESA Open Invitation To Tender AO8743
Open Date: 04/07/2016
Closing Date: 22/09/2016 13:00:00


Status: ISSUED
Reference Nr.: 16.1MS.05
Prog. Ref.: Infrast. Sust.3rdBFC
Budget Ref.: E/0101-01P - Infrast. Sust.3rdBFC
Special Prov.: BE+DK+FR+DE+IT+NL+ES+SE+CH+GB+NO+PT+RO
Tender Type: C
Price Range: > 500 KEURO
Products: Satellites & Probes / Materials / Metallic
Technology Domains: Mission Operation and Ground Data Systems / Advanced System Concepts Materials and Processes / Materials Processes / Joining Materials and Processes / Materials Processes / Advanced Materials Manufacture
Establishment: ESTEC
Department: ISS Programme and Exploration Department
Division: Development and Future Projects Division
Contract Officer: Hamon, Soisick
Industrial Policy Measure: N/A - Not apply
Last Update Date: 04/07/2016
Update Reason: Tender issue

Additive Manufacturing (also referred to as 3D printing) is a fast evolving and very competitive technology domain which is revolutionising the approach to conceiving and manufacturing parts. When considering space exploration missions, such a technology will allow realisation of in-orbit manufacturing and repair as well as new designs, tailored to a micro/reduced gravity environment (i.e. without launch loads). This may entail a major departure from how pre-flight qualification/testing is performed today for space hardware. While initiatives have recently materialised to install and operate 3D printers on the ISS (ZeroG Printer by Made In Space, POP3D by TASI), these are currently limited to using polymers and engineering plastics. A necessary evolution is to expand the manufacturing capabilities to metallic materials processing and printing. There are on-going initiatives within ESA, Academia and Industry (e.g. AMAZE project, study on Universal fabricator/replicator) that aim at consolidating Europe’s leadership in the field. This proposed project intends to complement and exploit synergies with these initiatives and provide data for European industry and academia to improve their systems and qualify them for use on board of the ISS. This proposal will produce/assemble and validate a European 3D printer demonstrator capable of printing small objects using metallic materials at the ISS. Building upon the activities already undertaken by the Agency, it has been decided to initially use wire-fed systems only, and developed as a sub-rack payload for EDR2 in Columbus for this demonstrator. The printer will produce a set of test samples so as to demonstrate feasibility and analyse the effect of manufacturing parameters. Production samples will be returned to ground for in-depth analyses, including mechanical and microstructural evaluation. In addition, the project will allow demonstrating the concept of in-situ part manufacturing and repair by printing a set of items representative of both the expected complexity and functionality.

If you wish to access the documents related to the Invitation to Tender, you have to log in to the ESA Portal.